I received the camera promptly and started by putting it in my full sized, long bed 1997 pickup truck running it off a free separate battery for the camera just to test that the image could be received well in the cab of the truck. The screen shot you see was taken with my cell phone and then rotated to the correct orientation with Gimp, so those of you who are aware what all of that does to an image, know that it does not do justice to the very sharp and pleasant image that I was surprised to see. The night-time image, of course, is no where near as clear (not shown) but I could still easily make out the houses across the street.I chose to install the camera so that it is powered by the tail lights so I could turn it on and off at will. I tend to drive with my headlights on all of the time as a safety measure, so I control the camera with the push button on the cigarette lighter plug in power supply. This method of powering the monitor works perfectly for me because my old pickup has two easy to reach cigarette lighters. I could have used the enclosed additional to permanently power the monitor, but I did not. I was pleasantly surprised to see that the image remained sharp even after running the wires with the antenna through my all metal truck bumper to reach the light assembly to provide power.There are bright LED lights on the camera that only come on in the dark. One concern I have, which may be a reason I will switch my power over to backup lights for the camera, is that the bright LED lights may be distracting to anyone following me at night. I will have to check that out and if it is a problem, I will switch over to using the backup light instead.The support I received with this camera was unprecedented! I received an email offering help and I received it. I had trouble with one of the links for the YouTube videos and then sent it to me so I could click on it. The YouTube 2nd and 3rd YouTube videos are for wired cameras, which are much more difficult to install, so I pretty much ignored them. I did have trouble getting a good solid power connection with the enclosed easy to install connectors. There connectors usually do not have issues as I have used them before. Thankfully, I decided to put Anderson Power Pole connectors on the wires coming from the tail lights so that I could easily manipulate the power wires from the camera if I wanted to. That made it easy to use a multimeter to determine where the poor connection was and just manipulate the wires to fix it. If you have trouble getting a good connection and you do not have that option, I would suggest just pulling out the silver connector and slightly repositioning the wires and pressing it down again.You are provided with an option to receive an additional camera that uses a different frequency allowing you two switch views from rear to front on the same monitor if you if you choose, and they are sending that to me. That is only good for one camera, so if you buy more than one camera, you need to purchase the front view camera which is found here: https://www.amazon.com/dp/B07WWTRTR5?ref=myi_title_dp. I plan to do that as I will be installing these on my old car as well!